Make Sure Your Battery Is Safe Just By Keeping It Clean
Was there actually a time when your vehicle required jumpstarting, and your battery was barely visible through all the gunk? That ugly gunk is battery corrosion thats formed by acid condensation. It can be cleaned by a standard chemical solution, since it has been formed by an acid. A familiar household product, which is baking soda, can clean battery acid very easily. Maintaining your battery is not very difficult to accomplish but you should take necessary precautions.
First off, you’ll need the tools which you can get easily in your home. You mainly need safety glasses for your eyes, baking soda, adjustable pliers and screwdrivers with insulated handles and a stiff-bristled brush. Additionally, you will need open-end and box wrenches, a good solid scraper either metal or plastic, cleaning brushes for the battery terminal along with a turkey baster or small funnel. It’s also necessary to have a container of water,rubber gloves, spray-on household cleaner and some sponges or clean cloths. It might appear like a lot of stuff to clean the device, but it will keep it safe and non-hazardous.
You will have to have the safety glasses and rubber gloves to protect yourself from the sulfuric acid that’s contained in the corrosive deposits. You should be sure that the deposits avoid getting on the car since it will damage the paint. Contingent on how corroded the battery happens to be, the amount of cleaning that is needed will vary. So that you can completely eliminate the dirt and corrosion, you will need to take the battery out of the vehicle. For the initial cleaning, you work with the scraper and the bristle brush to remove as much of the dirt and corrosion as you can.
The next thing is to come up with a mixture of one tablespoon of baking soda to a pint of water, and take the turkey baster, and carefully apply the solution to the outside of the battery, along with the cable connections. Then you’re able to use the bristle brush to loosen and remove the deposits from the battery and you want to remove the cables so that cleaning will be easier. Take advantage of the pliers or perhaps assorted wrenches to loosen the connectivity before pulling them off, starting with the negative first, and then the positive. Brush aside every last bit of corrosion from the terminals and all of the parts, and then flush each one with the baking soda solution.
You can use the squirt cleaner and sponge to eliminate any surplus dirt and grease. Right after, dry all of the parts and reassemble everything and be sure you hook up the cable with positive first. Finally, as soon as everything is secured and accurately put together, you will now have a safe and clean battery.